download
1. 2. REMOVE ATF LEVEL GAUGE REMOVE ENGINE UNDER COVER Torque: 29 N·m (296 kgf·cm, 21 ft·lbf) 3. 3RZ–FE: DISCONNECT THROTTLE CABLE Loosen the nut and disconnect the cable. Separate the throttle cable from the clamp. (a) (b) 4. REMOVE NO.1 FAN SHROUD Remove the 4 bolts and No.1 fan shroud. 5. REMOVE TRANSMISSION SHIFT LEVER ASSEMBLY AND TRANSFER SHIFT LEVER Remove the 2 bolts, 4 screws and rear console box. (a) (b) w/ One touch 2–4 selector: Remove the 3 screws and front console box with the transfer shift lever knob. (c) w/o One touch 2–4 selector: Remove the 2 screws and front console box with the transfer shift lever knob. Disconnect the connectors. (d) (e) Remove the nut and washer, and disconnect the shift control rod. (f) Disconnect the connector and remove the 8 screws and transmission shift lever assembly. (g) Using snap ring pliers, remove the snap ring and pull out the shift lever from the transfer. HINT: At the time of installation, apply MP grease to the transfer shift lever. 6. REMOVE OIL FILLER PIPE (a) 3RZ–FE: Remove the 2 bolts and oil filler pipe with the O–ring. HINT: At the time of installation, replace the used O–ring with a new one. (b) 5VZ–FE: Remove the bolt and oil filler pipe with the O–ring. HINT: At the time of installation, replace the used O–ring with a new one. 7. REMOVE FRONT AND REAR PROPELLER SHAFT (See page PR–11)