Some customers could remark that the car has no motion when the transmission is shifted to DRIVE or THIRD position, but there is normal operation when it’s shifted to SECOND, FIRST or REVERSE position.Correction When inspecting the sprag, it is very important take a look at the sprag for correct operation by holding the outer race (644) with one hand whereas rotating the input solar gear (640) with the opposite hand. The sun gear ought to rotate only in the counterclockwise course with the enter solar gear facing upward. If the sprag rotates in each directions or will not rotate in both path, the sprag parts must be inspected by removing one of the sprag reserved. retaining rings (643). Refer meeting to SI Unit Restore section for ahead clutch sprag disassembly procedures.

download