SYMPTOM The blower motor does not work at all. PROBABLE CAUSE Poor connection at the blower motor caused by tension on the wiring harness. CORRECTIVE ACTION Install a blower motor sub harness. REPAIR PROCEDURE 1. Remove the glove box and cover: • 1999–03 3.2 TL: See page 20-66 of the 1999–03 3.2 TL Service Manual. • 2001–03 3.2 CL: See page 20-64 of the 2001–03 3.2 CL Service Manual. • Online, enter keyword GLOVE, and select Glove Box Removal/Installation from the list. 2. Disconnect the brown 7P connector (C202) from the main harness. Remove the YEL/BLK wire terminal from cavity 3 of connector C202. Cut off the terminal, and tape the remaining end of the wire to the harness. NOTE: If necessary, refer to the terminal replacement section of the appropriate ETM for how to properly remove a terminal from a connecto

download