STOCK EXHAUST SYSTEM REMOVAL (Yamaha R1) 1. Remove and place the mid and lower fairings in a safe place. The right side lower fairing will need to be trimmed for proper exhaust clearance. 2. Remove the seat/passenger seat and tail section. 3. Remove the right and left canister mount covers. These can be seen once the tail section has been removed. 4. Remove the catalytic converter heat shield located on the right side. This will not be used with the new system. 5. For the EXUP motor you will have two options: A) Leave the motor in place but disconnect the control cables at the servo. B) Remove the EXUP completely. Please note that this will result in the check engine light to come on. However no problem or damage will occur and this will not effect performance. 6. Carefully remove the complete stock exhaust system, Y-Pipe and headers from the motorcycle. 7. Remove the lower footpeg mounting bolt on the right side. Check the condition of the exhaust gaskets and if necessary replace them. Yamaha part number # 4FM-14613-00-00

download