1. remove the passenger’s dashboard lower cover (see passenger’s dashboard lower cover removal/installation ), the right kick panel (see component location index ), and the glove box (see glove box removal/installation ). 2. remove the bolt, then cut the plastic cross brace in the glove box opening with diagonal cutters in the area shown. remove and discard the plastic cross brace. 3. remove the relays (a), then remove the bolts and the glove box frame (b). 4. remove the ecm/pcm (see how to reset the ecm/pcm ). 5. disconnect the connectors (a) from the blower motor, the power transistor, and the recirculation control motor, then remove the wire harness clips (b). 6. fold the carpet and pad back toward you. remove the mounting bolts, the mounting nut, and the blower unit. 7. install the unit in the reverse order of removal, and note these items. make sure that there is no air leakage. do the ecm/pcm idle learn procedure (see ecm/pcm idle learn procedure ).

Download