Installation. Customer Information: The information in this installation instruction is intended for use only by skilled technicians who have the proper tools, equipment, and training to correctly and safely add equipment to your vehicle. These procedures should not be attempted by “do-it-yourselfers.” 1. Make sure you have the anti-theft code for the radio, then write down the radio station presets. 2. Disconnect the negative cable from the battery. Routing the Fog Light Harness 3. Open the hood. Remove the bulkhead cover (11 clips). 4. Remove the front bumper (four short clips, two self-tapping screws, four bolts, and two long clips). 5. Remove the wire cable clip and the tube from the air cleaner case. 6. Remove the air cleaner case (2 bolts), and remove the air cleaner assembly. Be careful not to damage the vehicle harness. 7. Lift the cover on the positive battery cable, and route the terminal end of the fusible link through the cover.

Download