corolla

download
 Some 2009 – 2010 model year Corolla vehicles may exhibit premature pad wear. Use the following replacement pads to address this condition. Repair Procedure 1. Remove the front wheel. 2. Inspect the front pads for any irregular wear by loosening the two bolts on the brake caliper assembly. 3. Remove the brake caliper assembly and support it to prevent damage to the ?exible line. 4. Inspect the front pads for wear. If the pads are worn excessively, then replace the pads with the new part number. 5. Add disc brake caliper grease to both sides of the pad support clips and the anti-squeal shims. Figure 3. Figure 4. 2 1 1 No. 1 Disc Brake Pad Support Plate 2 No. 2 Disc Brake Pad Support Plate : 1 1 Add Grease Here (Pad Support Clips) NOTE Install the new anti-squeal shims and the pad wear indicators to the brake pads in the correct position to ensure quiet operation. Figure 5. : 1 1 Add Grease to These Surfaces 6. Install the pads into the brake caliper support assembly. 7. Install the brake caliper and tighten the caliper bolts. Torque: 34 N*m (347 kgf*cm, 25 ft*lbf) 8. Install the wheel and tighten the wheel nuts. Torque: 103 N*m (1050 kgf*cm, 76 ft*lbf) 9. Road test the vehicle to con?rm that there are no further issues with the brake system.