Let’s begin: • Remove the seat • Remove the Speedometer Assembly after unscrewing three screws and disconnecting the multi-pin connectors under its front edge. • Remove the left side, painted cover- you can just remove the two screws that hold it on, wrap it in a soft cloth and carefully hang it by the seat-release cable still attached. • Remove both chromed covers below the sides of the gas tank- they’re in the places where air filters might be on other motorcycles. The one on the left covers a fuel pressure regulator and some hoses and the cover on the right side hides the ignition coil for the rear cylinder (which Yamaha calls cylinder #1, by the way). • Make sure there is plenty of gas in the secondary gas tank (under the seat), then remove the primary Gas Tank- after taking off the rubber plugs on the fuel line shut-off valves, turn in the screws in the valves, place some rags under the valves to catch some gasoline and disconnect the fuel hoses from the secondary (under seat) gas tank. Remove the chromed trim from in front of the tank. Remove the screws that attach the tank to the frame brackets and lift off the tank.

Download Yamaha Roadliner/Stratoliner Valve Adjustment & Throttle Body Synchronization