download
Removing Factory Parts Please follow the factory repair manual procedures when removing the parts. ??? Please remove the negative (-) terminal from the battery. ??? Remove the engine undercover panels. ??? Remove the front bumper cover. ??? If you have the GReddy turbo kit, please remove compression pipe C-2. ??? Remove air hoses B/C/D/E and air pipes B/C. ??? Remove the factory intercooler. ??? Drain the P/S fluid and remove the P/S cooler. Disconnect the factory P/S hose as designated by the arrow. ?? Relocation Kit ??? ??? Mount the P/S cooler according to the image ?/? Cooler Installation ? using the P/S cooler clamps and 6mmx15mm nuts and bolts. (Parts used:??,?,??,??) ??? Use the provided 9mm hoses (960mm and 1070mm) please cut them to fit. The 1070mm hose is installed on the upper portion of the P/S cooler and the 960mm hose should be installed on the lower portion. Use the provided hose bands to secure the hose ends.