download
HINT: – The installation is in the reverse order of the removal. However, when there is a special point concerning the installation, it is indicated. – When the power back door drive unit, back door w/motor lock and battery is reconnected, the back door is locked and therefore cannot be opened. Therefore, it is necessary to unlock the back door using the door control switch or transmitter switch. 1. REMOVE BACK DOOR TRIM BOARD LH a. Using a screwdriver, disengage the 3 claws and remove the trim board. HINT: Tape the screwdriver tip before use. 2. REMOVE BACK WINDOW PANEL TRIM UPPER a. Using a screwdriver, disengage the 2 claws and 7 clips, and remove the trim upper. HINT: Tape the screwdriver tip before use. 3. REMOVE ROOF HEADLINING ASSY 4. REMOVE POWER BACK DOOR DRIVE UNIT a. Remove 2 bolts A indicated in the illustration. b. Remove the 4 bolts and drive unit. c. Disconnect the connector.5. REMOVE BACK DOOR TRIM PANEL ASSY UPPER a. Using a screwdriver, disengage the 10 clips and remove the trim panel. HINT: Tape the screwdriver tip before use. 6. REMOVE BACK DOOR TRIM PANEL ASSY a. Using a screwdriver, disengage the 8 clips and remove the trim panel. HINT: Tape the screwdriver tip before use. 7. REMOVE BACK DOOR TRIM COVER RH a. Using a screwdriver, disengage the 3 clips and remove the trim cover. HINT: Tape the screwdriver tip before use. 8. REMOVE BACK DOOR TRIM COVER LH HINT: Use the same procedures described for the RH side. 9. REMOVE BACK DOOR TRIM SPACER RH a. Remove the screw. b. Using a clip remover, disengage the claw and remove the trim spacer. 10. REMOVE BACK DOOR TRIM SPACER LH