Nissan is conducting a Voluntary Recall Campaign on certain specific 2008 – 2010 Armada & Titan and 2008 – 2009 Quest vehicles to inspect, and if necessary, replace the brake pedal. On a small number of the potentially affected vehicles the brake pedal assembly may have been manufactured out of specification. INSPECTION INSTRUCTIONS 1. Look under the dash to view the brake pedal pivot pin. . Figure 1 2. Inspect the right side (inboard side) of the brake pedal pivot pin (see Figure 2). • See Figure 3 on the next page for photos of OK and NG conditions. 3. Inspection results (see Figures below): • OK – No further action required. • NG – Replace the brake pedal assembly. OK: Pin should look like this NG: Replace brake pedal assembly “Rolled” pin end clearly seen Figure 3 “Square” pin end clearly seen Figure 4 OK: Pin should look like this OK: Pin should look like this “Rolled” pin end clearly seen “Rolled” pin end clearly seen

download