1. Examine the fluid level within the brake grasp cylinder reservoir. 2. If the brake fluid stage is midway between the maximum-full level and the minimum allowable degree, no brake fluid needs to be faraway from the reservoir before proceeding. 3. If the brake fluid stage is greater than midway between the maximum-full level and the minimal allowable level, remove brake fluid to the halfway level before proceeding. 4. Raise and suitably support the vehicle. Discuss with Automobile Lifting. 5. Remove the tire and wheel assembly. 6. Inspect the caliper operation. Consult with Brake Caliper Inspection.7. Place a C-clamp as shown. Slowly backside the pistons of the caliper. It could be necessary to reposition the C-clamp to allow both of the pistons to bottom into the caliper bores.

download