download
Brake caliper housing with integral parking brake on the rear axle. To ensure that the parking brake works perfectly, when a new brake caliper is fitted, and every time the brake pads are replaced the piston must be adjusted as described below: Removal: Release / unclip the handbrake cable Remove screw plug (a) – see Fig. 1 Slacken the hexagon socket screw (Fig. 2). Withdraw the piston until it stops moving. Installation: Screw in the hexagon socket screw in a clockwise direction (Figure 3) until the brake shoes touch the brake disc and the brake disc becomes difficult to turn. Then slacken the adjuster screw by one third to half of a turn (Brake disc will turn easily – see Fig. 4). Screw in and tighten screw plug (1) – Fig. 5. Attach brake cable and adjust it in accordance with the manufacturer’s instructions.