download
1. Remove tailgate cover 5. Slide bracket into tailgate over studs 9. Connect actuator to loom and use cable tie/clip to secure cable. 2. Remove nut 6. Replace both nuts 3. Remove nut 7. Remove cable cover 11. Run the cable along the chassis, taking care to ensure it is kept away from heat sources. 12. Bring the cable through the grommet located under the passen- ger seat. 13. Remove the door sill trim from the passenger side front door. 14. Connect the wires as follows. TruckLok Vehicle Red Blue 4. Slide bracket into tailgate 8. Feed cable through grommet 15. Close all doors and test using vehicle’s key. Do not test repeatedly as the actuator may overheat. 16. Replace all trim and tailgate cover.