download
NB These instructions are a guide on how to remove and re-fit an electric window mechanism and are not intended to be complete. It was written some time after the job was done and some improvisation will be needed. 1. Removing the door panel Pop off the door handle trim screw cover with a small flathead screw driver, then remove the screw behind with a torx bit Tools required :
T30 Torx Bit Small flathead screwdriver Remove the triangular plastic trim located just off the picture by prying gently with a screwdriver to first loosen, then use your hands to work it out. Locate the lower door panel screws as circled in the picture.