Removal of Original Parts a. Disconnect the battery. b. Secure and raise the motorcycle 9 to 10 inches using a quality motorcycle lift. Remove the following from the vehicle. See OEM manual for detailed instructions. Items to be retained for re-installation after modification are noted. Rider’s Seat (to be re-installed without modification). Passenger Seat (to be reinstalled without modification). NOTE: OEM front / rear seat mount bracket and rear seat mounting bolt to be retained and reused. Passenger Back Rest w/ Mounting Rails (to be re-installed without modification). NOTE: Back rest to mounting rail hardware to be reused. Mount rail to vehicle frame not to be reused. Left and right passenger foot rests (to be re-installed without modification). Drive Pulley / Belt cover (to be re-installed without modification). Mufflers (to be re-installed and relocated with minor modification). Rear Fender (complete w/ sub frame and all attaching parts). NOTE: Upper Forward Fender Mounting Bolt to be retained and reinstalled. Shock Absorber to Swing Arm Mounting Bolt (to be re-installed). Swing Arm and Rear Wheel (complete w/ all attaching parts).

download