SADDLEBAG INSTALLATION 1. Confer with Determine 1. Data: This procedure should solely be done one aspect at a time. 2. Take away the two rear bolts on right facet fender strut holding the fender. Loosen the three entrance bolts from the fender strut. (Do not remove.) Pull the fender strut away from the fender to permit the mounting bracket to slip in between the fender and the strut. 3. Slide help bracket between fender and fender strut until support bracket holes are lined up with fender strut holes. Rubber bumpers will level out. 4. Install the eight x 65 mm hex spool bolt meeting and 17 x 15 x 8mm aluminum spacer in the front hole and the 8 x 55 mm hex spool bolt meeting and 17 x 15 x 8mm aluminum spacer into the rear hole. 5. Repeat process for left side. Info: Luggage might be simpler to mount and take away if a small quantity of silicone lubrication is utilized to rubber mounting points. 6. Mount saddlebags over spools on fender mount and secure with clips retained inside bags. 7. Tighten all mounting bolts. LeatherLyke 626 2/4/2009 8. Examine each clip to verify each clip is correctly seated in retaining groove. See View “A”. SADDLEBAG CARE INSTRUCTIONS h Do not exceed 20 lbs. per saddlebag this consists of sitting or standing on luggage, it is a standard occurrence for a non-rider to aim to sit on baggage,

download