Removal. 1. Remove air filter housing. 2. Remove the seat or seats. 3. Disconnect Fuel Lines (also the vapor line from tank to. 4. charcoal canister on California models). 5. Disconnect instrument connectors from the fuel tank. 6. Remove fuel tank. 7. Remove air box. 8. Disconnect TPS and heater connectors. 9. Remove chrome carb cover. 10. Disconnect Fuel Lines. 11. Remove rubber carb elbows. 12. Disconnect throttle cables from carbs. 13. Remove the carbs. 14. Perform the jetting. Tool List: 3mm Allen wrench. 5mm Allen wrench. 10mm wrench or socket. 12mm wrench or socket. #2 Philips head screwdriver. Flat tipped screwdriver. Pliers. Needle nosed vise grips. Battery powered drill. Drill bit. Small flat tipped screwdriver. Others… If you are savvy enough to stop reading here.