Removal of Stock Seats 1. Remove the rear fender nut from passenger seat. 2. Raise and slide passenger seat again to remove. 3. Remove the spacer washer from the passenger rear mount stud and retailer away if you are putting in the Ultimate passenger seat. 4. Remove the passenger seat bracket from the fender and retailer away if your installing the Final passenger seat. See image under Fig. 1 5. Take away the bolt holding the rider seat and retailer away in case your putting in the Ultimate passenger seat, in case your utilizing the inventory passenger seat use the same bolt. 6. Slide rider seat back and up to remove. Install new seats 1. All of the mounting brackets are already put in on your new seats. 2. Set up your new Ultimate rider seat, use the brand new included bolt, spool and nylon washer on top of the rider seat rear bracket to bolt down if your putting in the Ultimate passenger seat. See image under – fig. 2 3. Set up your new Ultimate passenger seat by sliding the fork bracket on the seat into the spool, be sure you push the passenger seat all the way in which forward into the spool, hold it forward and safe with the original nut on the rear fender.